SINGLE: Utility
Edit P. Ch. Tbl.
There is a Program Change Table in TX81Z memory that can be used to
“redirect” incoming Program Change messages. When a program change (on the
Receive Channel, p.25) is received, this table is consulted, and the correspond-
ing Voice or Performance is selected. To edit the table, answer YES, and use
the PARAMETER keys to step through PGM 1
–
PGM 128. Use the DATA
ENTRY keys to select a Voice number I01-D32 or a Performance number
PF01-PF24.
Memory Protect (off, on)
When this is On, you will not be able to store voices or performances nor will
the TX receive 32 Voice or 24 Performance bulk data.
Memory Protect is reset to On when the power is turned on, and after bulk
data is received via MlDI or loaded from cassette. Memory Protect is also
accessible from Performance Utility mode.
Combine (off, on)
Each voice memory includes Voice Function data (see p.21) that specifies how
the voice will respond to MIDI control messages. When Combine is On, each
newly selected voice uses its own Voice Function data. By setting Combine
Off, you can preserve the current function settings. ie. newly selected voices
will use the current settings.
When power is turned on. Combine will be set On.
Combine off/on affects the following functions.
n
Pitch Bend Range
n
Portamento Time
n
FC Volume
n
FC/MW/BC Pitch and Amplitude
n
BC Pitch Bias
n
BC EG Bias
n
Poly/Mono
n
Portamento Mode
–27–