Yamaha TTR250V, Owner'S Manual

Page: 27 / 87

INSTRUMENT AND CONTROL FUNCTIONS
3-10
1
2
3
4
5
6
7
8
9
CAUTION:
ECA11240
Always tighten the locknut against
the adjusting nut, and then tighten
the locknut to the specified torque.
Rebound damping force
To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting dial in direction
(a). To decrease the rebound damping
force and thereby soften the rebound
damping, turn the adjusting dial in di-
rection (b).
Compression damping force
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting knob
in direction (a). To decrease the com-
pression damping force and thereby
soften the compression damping, turn
the adjusting knob in direction (b).
NOTE:
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
WARNING
EWA10220
This shock absorber contains highly
pressurized nitrogen gas. For prop-
Tightening torque:
Locknut:
70 Nm (7.0 m·kgf, 51 ft·lbf)
1. Rebound damping force adjusting dial
1
(b)
(a)
Rebound damping setting:
Minimum (soft):
16 clicks in direction (b)*
Standard:
8 clicks in direction (b)*
Maximum (hard):
1 click in direction (b)*
* With the adjusting dial fully turned in
direction (a)
1. Compression damping force adjusting
knob
1
(a)
(b)
Compression damping setting:
Minimum (soft):
5 clicks in direction (a)*
Standard:
11 clicks in direction (a)*
Maximum (hard):
15 clicks in direction (a)*
* With the adjusting knob fully turned in
direction (b)