Yamaha TTR250V, Owner'S Manual

Page: 25 / 87

INSTRUMENT AND CONTROL FUNCTIONS
3-8
1
2
3
4
5
6
7
8
9
CAUTION:
ECA10090
Never exceed the maximum air pres-
sure, otherwise the front fork oil
seals may become damaged.
WARNING
EWA10180
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
5. Securely install the air valve caps.
Damping force
1. Remove the rubber cap from each
fork leg.
2. To increase the damping force and
thereby harden the damping, turn
the adjusting screw on each fork
leg in direction (a). To decrease
the damping force and thereby
soften the damping, turn the ad-
justing screw on each fork leg in di-
rection (b).
CAUTION:
ECA10100
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
3. Securely install the rubber caps.
Spring rate:
Minimum (soft):
Air pressure = 0 kPa (0 psi)
(0 kgf/cm
2
)
Standard:
Air pressure = 0 kPa (0 psi)
(0 kgf/cm
2
)
Maximum (hard):
Air pressure = 40 kPa (5.8 psi)
(0.4 kgf/cm
2
)
1. Rubber cap
1
1. Damping force adjusting screw
Damping setting:
Minimum (soft):
20 clicks in direction (b)*
Standard:
11 clicks in direction (b)*
Maximum (hard):
1 click in direction (b)*
* With the adjusting screw fully turned
in direction (a)
1
(a)
(b)