7-1
EAU01518
MOTORCYCLE CARE AND STORAGE
1
2
8
9
Care
The exposure of its technology
makes a motorcycle charming but
also vulnerable. Although high-
quality components are used, they
are not all rust-resistant. While a
rusty exhaust pipe may remain
unnoticed on a car, it does look
unattractive on a motorcycle.
Frequent and proper care, howev-
er, will keep your motorcycle look-
ing good, extend its life and main-
tain its performance. Moreover, the
warranty states that the vehicle
must be properly taken care of. For
all these reasons, it is recommend-
ed that you observe the following
cleaning and storing precautions.
Before cleaning
1. Cover up the muffler outlet
with a plastic bag.
2. Make sure that all caps and
covers as well as all electrical
couplers and connectors,
including the spark plug cap,
are tightly installed.
3. Remove extremely stubborn
dirt, like oil burnt onto the
crankcase, with a degreasing
agent and a brush, but never
apply such products onto
seals, gaskets, sprockets, the
drive chain and wheel axles.
Always rinse the dirt and
degreaser off with water.
Cleaning
After normal use
Remove dirt with warm water, a
neutral detergent and a soft clean
sponge, then rinse with plenty of
clean water. Use a tooth or bottle
brush for hard-to-reach parts.
Tougher dirt and insects will come
off more easily if the area is cov-
ered with a wet cloth for a few
minutes before cleaning.
ECA00010
c
C
8
Avoid using strong acidic
wheel cleaners, especially on
spoked wheels. If you do use
such products for hard-to-
remove dirt, do not leave it on
any longer than instructed,
then thoroughly rinse it off
with water, immediately dry
the area and apply a corrosion
protection spray.
4PX-9-25-7, 8, 9(AUS) 4/17/0 12:44 PM Page 2