6-30
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
1
EAU01235
Headlight bulb replacement
This motorcycle is equipped with a
quartz bulb headlight. If the head-
light bulb burns out, replace the
bulb as follows:
1. Remove cowling A. (See page
6-6 for cowling removal and
installation procedures.)
2. Remove the bolts holding the
headlight unit.
3. Remove the headlight unit and
connector.
4. Remove the bulb holding
cover and then the defective
bulb by turning the bulb hold-
er counterclockwise.
1.
Bolt (
×
3)
EW000120
w
Keep flammable products and your
hands away from the bulb while it
is on, as it is hot. Do not touch the
bulb until it cools down.
5. Put a new bulb into position
and secure it in place with the
bulb holder.
1
1.
Bulb holder
1
1.
Don’t touch
EC000106
c
C
Avoid touching the glass part of
the bulb. Keep it free from oil; oth-
erwise, the transparency of the
glass, life of the bulb, and illumi-
nous flux will be adversely affect-
ed. If oil gets on the bulb, thor-
oughly clean it with a cloth
moistened with alcohol or lacquer
thinner.
6. Install the connector and the
bulb holding cover.
4PX-9-25-6(AUS) 4/17/0 12:43 PM Page 31
