3-3
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
1
2
EAU00138
Engine stop switch
The engine stop switch is a safety
device for use in an emergency
such as when the motorcycle over-
turns or if trouble occurs in the
throttle system. Turn the switch to
“
#
” to start the engine.
In case of emergency, turn the
switch to “
$
” to stop the engine.
EAU00141
Start switch “START”
The starter motor cranks the
engine when pushing the start
switch.
1.
Engine stop switch
2.
Start switch “START”
EC000005
c
C
See starting instructions prior to
starting the engine.
1
EAU00152
Clutch lever
The clutch lever is located on the
left handlebar, and the ignition cir-
cuit cut-off system is incorporated
in the clutch lever holder. Pull the
clutch lever to the handlebar to dis-
engage the clutch, and release the
lever to engage the clutch. The
lever should be pulled rapidly and
released slowly for smooth clutch
operation. (Refer to the engine
starting procedures for a descrip-
tion of the ignition circuit cut-off
system.)
1.
Clutch lever
4PX-9-25-3, 4, 5(AUS) 4/17/0 12:40 PM Page 3
