Yamaha TT-R125LWE Owner'S Manual Download Page 68

Page: 68 / 86

Perio

ic maintenance an

justment

7-33

EAU25905

Trou

leshootin

chart

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel.

The engine does not start.
Check the battery.

The engine does not start.
Have a Yamaha dealer check the vehicle.

Try starting the engine.

4. Compression

There is compression.

There is no compression.

Remove the spark plug
and check the electrodes.

. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug(s).

Have a Yamaha dealer check the vehicle.

The engine does not start.
Check the compression.

The engine does not start.
Check the ignition.

Operate the electric starter.

2. Battery

The engine turns over
quickly.

The engine turns over
slowly.

The battery is good.

Check the battery lead connections,
and charge the battery if necessary.

Dry

Wet

Open the throttle halfway and try
starting the engine.

U2PT17E0.book Page 33 Monday, March 30, 2020 2:13 PM

Summary of Contents for TT-R125LWE























































































Search results

Summary of Contents for TT-R125LWE

Reviews:

Related manuals for TT-R125LWE

Brands by name

Popular brands

Yamaha TT-R125LWE, Owner'S Manual

Search results

Summary of Contents for TT-R125LWE

Reviews:

Related manuals for TT-R125LWE

Brands by name

Popular brands