Instrument an
d
control functions
4-2
4
EAU12672
En
g
ine stop
b
utton “ENGINE STOP”
Hold this button pushed until the en-
gine stops in case of an emergency,
such as when the vehicle overturns or
when the throttle cable is stuck.
EAU12713
Start switch “
”
Push this switch to crank the engine
with the starter. See page 6-2 for start-
ing instructions prior to starting the en-
gine.
EAU31642
Clutch lever
The clutch lever is located on the left
side of the handlebar. To disengage
the clutch, pull the lever toward the
handlebar grip. To engage the clutch,
release the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the start-
ing circuit cut-off system. (See page
4-11.)
EAU12876
Shift pe
d
al
The shift pedal is located on the left
side of the motorcycle. To shift the
transmission to a higher gear, move
the shift pedal up. To shift the trans-
mission to a lower gear, move the shift
pedal down. (See page 6-3.)
1. Clutch lever
1. Shift pedal
U2PT17E0.book Page 2 Monday, March 30, 2020 2:13 PM
Summary of Contents for TT-R125LWE
Page 1: ...PRINTED IN BRAZIL 2020 04 JC E TT R125LWE 2PT F8199 17 LIT 11626 34 46 ...
Page 10: ...Location of important labels 1 2 1 U2PT17E0 book Page 2 Monday March 30 2020 2 13 PM ...
Page 84: ...U2PT17E0 book Page 2 Monday March 30 2020 2 13 PM ...
Page 86: ...PRINTED IN BRAZIL 2020 04 JC E TT R125LWE 2PT F8199 17 LIT 11626 34 46 ...