Instrument an
d
control functions
3-37
3
5. Align the projection on the bottom
of the rider seat with the “L” posi-
tion slot, and then push the rear of
the seat down to lock it in place as
shown.
6. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
EAU63062
Helmet hol
d
er
The helmet holder is located under the
passenger seat. A helmet holding ca-
ble is provided in the tool kit to secure
a helmet to the helmet holder.
To secure a helmet
1. Remove the passenger seat.
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loops over the helmet hold-
er.
3. Place the helmet on the right side
of the vehicle, and then install the
seat.
WARNING! Never ri
d
e with
a helmet attache
d
to the helmet
hol
d
er, since the helmet may hit
o
b
jects, causin
g
loss of control
an
d
possi
b
ly an acci
d
ent.
[EWA10162]
To release the helmet
Remove the passenger seat, remove
the helmet holding cable from the hel-
met holder and the helmet, and then in-
stall the seat.
1. Projection
2. “L” position slot
1
2
1. Helmet
2. Helmet holding cable
3. Helmet holder
3
2
1
UB1JE1E0.book Page 37 Thursday, October 11, 2018 10:43 AM
