6
TP70
Owner’s Manual
As shown in the figures below, set up your drum pad on an electronic drum rack or a standard tom stand
(such as a product from the Yamaha WS series).
1.
Take the TP70 drum pad
q
and the S wing bolt
w
from the package and lightly tighten the S wing
bolt
w
(by five or six turns).
2.
Slide the drum pad
q
onto the hexagonal tom holder
e
from the rack or tom stand, and then
tighten the S wing bolt
w
to secure it in place.
The functions that the pad can perform will depend on which of your drum module’s trigger input jacks it
is connected to. A chart showing the pad functions available with various input jack types can be
accessed from the web site shown below.
http://download.yamaha.com/
Setting Up
CAUTION
If the wing bolt and other fasteners are not sufficiently tightened, your drum pad may fall, pos-
sibly causing injury. It is important, therefore, that you mount your pad securely on the drum
rack or stand. In addition, you should avoid placing your rack or stand on an uneven surface as
this may cause it to fall over, again increasing the risk of injury.
Pads & Trigger Input Jacks
w
q
e
q
w
Summary of Contents for TP70
Page 8: ......
