Menu List
TNR-e Quick Guide
21
User Voice Settings
Allows you to create your own voice.
You can create up to three User Voices.
A User Voice can be selected on the
“Instrument” Voice map by tapping [01/16],
[02/16], [03/16] in the Layer menu.
Tapping a User Voice on the “User Voice
Settings” window calls up a window for Note assignment as shown below.
For each User Voice, sixteen audio samples can be assigned to Notes 01 – 16, which correspond to
the pitch of each layer. To hear the assigned audio sound, tap the desired Note number in the list.
Note window
Tapping here opens each Note window.
Tapping this allows you to load or save all sixteen
Notes. Also, sampling data output via the TENORI-
ON User Voice Manager can be imported.
Imports .
W
AV files transferred via iTunes from
a computer.
Records audio signals input via the microphone of
the iPad.
Shows the length of sound data. Maximum available
sampling time is five seconds. If this is exceeded,
the duration time is shown in red.
Touch and slide leftward or rightward to adjust
the Trim area.
Executes Undo of the last operation.
Plays back the
audio shown in
the window.
Executes Normalize, which optimizes
the entire level of the audio data.
Executes Trim, which removes
the specified areas.
Tapping here saves the edited sound data as
a User Voice.
Imports the audio data made on another application.
Before using this function, you should copy the audio
data from another application to the clipboard.
Tapping the shown sound data calls up the “Copy/
Paste/Clear” menu.
Copy: Copies the sound data to the Clipboard.
Paste: Pastes the sound data from the Clipboard.
Clear: Clears the assigned sound data.
