6
PERIODIC MAINTENANCE AND MINOR REPAIR
6-13
EW000066
Make sure that no foreign material
enters the final gear case.
Make sure that no oil gets on the tire
or wheel.
WARNING
5. Add the specified amount of the
recommended final gear oil, and
then install and tighten the oil filler
bolt.
Recommended final gear oil:
Engine oil SAE 10W30
(API SE)
Oil quantity:
0.15 L
6. Check the final gear case for oil
leakage. If oil is leaking, check for
the cause.
EAU01587
Coolant
To check the coolant level
1. Place the scooter on the
centerstand.
NOTE:
•
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
•
Make sure that the scooter is
positioned straight up when
checking the coolant level. A slight
tilt to the side can result in a false
reading.
1. Maximum level mark
2. Minimum level mark
2. Remove panel B. (See page 6-6
for cover removal and installation
procedures.)
3. Check the coolant level in the
coolant reservoir.
NOTE:
The coolant should be between the
minimum and maximum level marks.
4. If the coolant is at or below the mi-
nimum level mark, open the
reservoir cap, add coolant to the
maximum level mark, and then
close the reservoir cap.
1
ZAUM0044
2
1
ZAUM0045
1. Coolant reservoir cap
Summary of Contents for TEO'S XN125
