Yamaha TEO'S XN125, Owner'S Manual

Page: 50 / 90

6
PERIODIC MAINTENANCE AND MINOR REPAIR
6-12
To reset the oil change indicator light
1. Push the “TRIP” button while
turning the key to “ON”.
2. Release the reset button, and the
oil change indicator light will go off.
NOTE:
If the engine oil is changed before the
oil change indicator light comes on (i.e.
before the periodic oil change interval
has been reached), the indicator light
must be reset after the oil change for
the next periodic oil change to be
indicated at the correct time. To reset
the oil change indicator light before the
periodic oil change interval has been
reached, follow the above procedure.
TOTAL
1
ZAUM0041
1. “TRIP” button 1. Oil filler bolt 1. Oil drain bolt
EAU02961
Final gear oil
The final gear case must be checked
for oil leakage before each ride. If any
leakage is found, have a Yamaha dea-
ler check and repair the scooter. In ad-
dition, the final gear oil must be
changed as follows at the intervals
specified in the periodic maintenance
and lubrication chart.
1. Place the scooter on the
centerstand.
NOTE:
Make sure that the scooter is positioned
straight up when checking the oil level.
A slight tilt to the side can result in a
false reading.
2. Place an oil pan under the final gear
case to collect the used oil.
3. Remove the oil filler bolt and drain
bolt to drain the oil from the final
gear case.
4. Install the final gear oil drain bolt,
and then tighten it to the specified
torque.
Tightening torque:
Final gear oil drain bolt:
22 Nm (2.2 m•kg)
1
ZAUM0042
1
ZAUM0043