Yamaha Tenere 700 2021, Owner'S Manual

Page: 65 / 112

Perio d ic maintenance an d a d justment
7-13
7
To chan g e the en g ine oil (an d re-
place the filter)
1. Place the vehicle on a level surfa-
ce.
2. Remove cowling A. (See page
7-10.)
3. Start the engine, warm it up for
several minutes, and then turn it
off.
4. Place an oil pan under the engine
to collect the used oil.
5. Remove the engine oil filler cap,
the engine oil drain bolt and its
gasket to drain the oil from the
crankcase.
TIP
Skip steps 6–8 if the oil filter cartridge
is not being replaced.
6. Remove the oil filter cartridge with
an oil filter wrench.
TIP
An oil filter wrench is available at a
Yamaha dealer.
7. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
TIP
Make sure that the O-ring is properly
seated.
8. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
1. Engine oil filler cap
2. O-ring
2
1
1. Engine oil drain bolt
2. Gasket
1. Oil filter cartridge
2. Oil filter wrench
1 2
1
2
1. O-ring
UBHL10E0.book Page 13 Tuesday, October 5, 2021 9:57 AM