background image

Intro

d

uction

EAU10084

Congratulations on your purchase of the Yamaha XTZ7N. This model is the result of Yamaha’s vast experience in the pro-
duction of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and re-
liability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you
have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer.
The design and manufacture of this Yamaha motorcycle fully comply with the emissions standards for clean air applicable
at the date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation
of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention
to the recommended maintenance schedules and operating instructions contained within this manual.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur-
rent product information available at the time of printing, there may be minor discrepancies between your motorcycle and
this manual. If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING

EWA10012

Please rea

d

 this manual an

d

 the “YOU AND YOUR MOTORCYCLE: RIDING TIPS” 

b

ooklet carefully 

b

efore operatin

g

this motorcycle. Do not attempt to operate this motorcycle until you have attaine

d

 a

d

equate knowle

dg

e of its con-

trols an

d

 operatin

g

 features. Re

g

ular inspections an

d

 careful maintenance, alon

g

 with 

g

oo

d

 operatin

g

 techniques,

will help ensure that you safely enjoy the capa

b

ilities an

d

 relia

b

ility of this motorcycle.

UBHL10E0.book  Page 1  Tuesday, October 5, 2021  9:57 AM

Summary of Contents for Tenere 700 2021

















































































































Reviews: