Perio
d
ic maintenance an
d
a
d
justment
7-9
7
EAU19607
Checkin
g
the spark plu
g
The spark plug is an important engine
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
plug should be removed and checked
in accordance with the periodic main-
tenance and lubrication chart. In addi-
tion, the condition of the spark plug
can reveal the condition of the engine.
To remove the spark plu
g
1. Remove the spark plug cap.
2. Remove the spark plug as shown,
with the spark plug wrench includ-
ed in the owner’s tool kit.
To check the spark plu
g
1. Check that the porcelain insulator
around the center electrode of the
spark plug is a medium-to-light
tan (the ideal color when the vehi-
cle is ridden normally).
TIP
If the spark plug shows a distinctly dif-
ferent color, the engine could be oper-
ating improperly. Do not attempt to
diagnose such problems yourself. In-
stead, have a Yamaha dealer check
the vehicle.
2. Check the spark plug for electrode
erosion and excessive carbon or
other deposits, and replace it if
necessary.
3. Measure the spark plug gap with a
wire thickness gauge and, if nec-
essary, adjust the gap to specifi-
cation.
To install the spark plu
g
1. Clean the surface of the spark
plug gasket and its mating sur-
face, and then wipe off any grime
from the spark plug threads.
2. Install the spark plug with the
spark plug wrench, and then tight-
en it to the specified torque.
1. Spark plug wrench
2. Screwdriver
1
2
Specifie
d
spark plu
g
:
NGK/CR6HSA
1. Spark plug gap
Spark plu
g
g
ap:
0.6–0.7 mm (0.024–0.028 in)
Ti
g
htenin
g
torque:
Spark plug:
12.5 N·m (1.25 kgf·m, 9.0 lb·ft)
UB6FE0E0.book Page 9 Friday, August 11, 2017 3:37 PM
