INSTRUMENT AND CONTROL FUNCTIONS
3-17
3
TIP
After resetting the average fuel con-
sumption display, “_ _._” will be shown
for that display until the vehicle has
traveled 1 km (0.6 mi).
NOTICE
ECA15474
If there is a malfunction, “– –.–” will
b
e continuously
d
isplaye
d
. Have a
Yamaha
d
ealer check the vehicle.
Instantaneous fuel consumption dis-
play:
The instantaneous fuel consumption
display modes “km/L”, “L/100km” or
“MPG” (for the UK only) show the fuel
consumption under the current riding
conditions.
The “km/L” display shows the dis-
tance that can be traveled on 1.0 L
of fuel.
The “L/100km” display shows the
amount of fuel necessary to travel
100 km.
For the UK only: The “MPG” dis-
play shows the distance that can
be traveled on 1.0 Imp.gal of fuel.
TIP
If traveling at speeds under 10 km/h
(6.0 mi/h), “_ _._” will be displayed.
NOTICE
ECA15474
If there is a malfunction, “– –.–” will
b
e continuously
d
isplaye
d
. Have a
Yamaha
d
ealer check the vehicle.
Settin
g
mo
d
e
TIP
The transmission must be in neu-
tral and the vehicle must be
stopped to change settings in this
mode.
Shifting the transmission into gear
and starting off, or turning the key
to “OFF”, saves all settings made,
then exits the setting mode.
Push and hold the menu switch
“MENU” for at least 2 seconds to enter
the setting mode. To exit the setting
mode and return to the normal display,
push and hold the menu switch
“MENU” again for at least 2 seconds.
12.3
CRNT FUEL
km/L
1. Setting mode display
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
1
Display
Description
“Grip Warmer”
This function allows you to
set the low, middle, and
high settings to 10 tem-
perature levels.
“Maintenance”
This function allows you to
check and reset the “OIL”
oil change interval (dis-
tance traveled), and the
“FREE-1” and “FREE-2”
maintenance intervals.
U2KBE0E0.book Page 17 Tuesday, September 17, 2013 8:19 AM