Yamaha SUPER TENERE, Owner'S Manual

Page: 50 / 118

INSTRUMENT AND CONTROL FUNCTIONS
3-35
3
EAU49475
A d justin g the ri d er seat hei g ht
The rider seat height can be adjusted
to one of two positions to suit the rid-
er’s preference.
The rider seat height was adjusted to
the higher position at delivery.
To chan g e the ri d er seat hei g ht to
the low position
1. Remove the rider seat. (See page
3-34.)
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
3. Install the rider seat height posi-
tion adjuster so that the match
mark is aligned with the “L” mark
as shown.
4. Insert the projection on the rear of
the rider seat into seat holder A as
shown.
To chan g e the ri d er seat hei g ht to
the hi g h position
1. Remove the rider seat. (See page
3-34.)
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
1. Low position
2. High position
1 2
1. Rider seat height position adjuster
1. Rider seat height position adjuster
2. “L” mark
3. Match mark
1
3
2
1
1. Projection
2. Seat holder A (for low position)
1
2
U2KBE0E0.book Page 35 Tuesday, September 17, 2013 8:19 AM