Perio
d
ic maintenance an
d
a
d
justment
6-16
6
EAU20071
Coolant
The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
EAU40157
To check the coolant level
1. Place the vehicle on the center-
stand.
TIP
The coolant level must be
checked on a cold engine since
the level varies with engine tem-
perature.
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Check the coolant level in the
coolant reservoir.
TIP
The coolant should be between the mi-
nimum and maximum level marks.
3. If the coolant is at or below the mi-
nimum level mark, remove the
coolant reservoir cap.
WARNING!
Remove only the coolant reser-
voir cap. Never attempt to re-
move the ra
d
iator cap when the
en
g
ine is hot.
[EWA15162]
4. Add coolant or distilled water to
raise the coolant to the maximum
level mark, install the coolant res-
ervoir cap.
NOTICE:
If coolant is
not availa
b
le, use
d
istille
d
water
or soft tap water instea
d
. Do not
use har
d
water or salt water
since it is harmful to the en
g
ine.
If water has
b
een use
d
instea
d
of coolant, replace it with cool-
ant as soon as possi
b
le, other-
wise the coolin
g
system will not
b
e protecte
d
a
g
ainst frost an
d
corrosion. If water has
b
een
a
dd
e
d
to the coolant, have a
Yamaha
d
ealer check the anti-
freeze content of the coolant as
soon as possi
b
le, otherwise the
effectiveness of the coolant will
b
e re
d
uce
d
.
[ECA10473]
1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark
2
1
3
1. Coolant reservoir cap
Coolant reservoir capacity (up to
the maximum level mark):
0.26 L (0.27 US qt, 0.23 Imp.qt)
1
UBP9E0E0.book Page 16 Wednesday, February 8, 2017 8:34 AM