Cubase SX3 / DM2000 V2 Setup and Operation
Page
6
User Defined Keys
When DM2000 is used to remotely control Cubase SX, the following User Defined Keys
have permanently assigned functions:
UDEF 1:
Brings the Project window to the front
UDEF 2:
Scrolls channels down in banks of 8
UDEF 3:
Scrolls channels up in banks of 8
UDEF 9:
Open or closes the VST Mixer window
UDEF 10: Scrolls channels down one channel at a time
UDEF 11: Scrolls channels up one channel at a time
Other User Defined Keys (UDEF 4-8 and 12-16) can be programmed by the user to
control various Cubase SX functions. These functions can be selected in the DEVICE
SETUP of Cubase SX, by selecting “YAMAHA DM2000 V2” and choosing the desired
‘Category’ and ‘Command’ from the drop-down list for each button.
Other Functions
ZOOM & NAVIGATION
The DM2000 CURSOR keys (next to the Scrub Wheel) have two different functions.
Their mode can be changed by pressing the INC key above the cursor keys. The mode is
shown on the LCD display.
•
ZOOM mode: the cursor keys control the vertical and horizontal zoom of the Project
Window.
•
NAVIGATION mode: the cursor keys control the selection of channels and objects in
the Project Window.
TIME COUNTER
The TIME COUNTER is displayed on the DM2000 LCD screen, with the counter mode
(TIME CODE / FEET / BEATS). If “Samples” is selected in Cubase SX, then no
selection is displayed in the DM2000 LCD.
METER BRIDGE
The DM2000 meter bridge displays Cubase SX’s input channel levels when the correct
REMOTE layer is selected. The TIME CODE counter is also displayed on the Meter
Bridge.
