How
to Use
SS-30
KBD. SPLIT
Switching this section changes the posi-
tion of tones of Cello and Violin systems.
There are marks on the keyboard (t he
panel ) so that each point of 1, 2, and
( the panel ) so that each point of 1, 2, and 3
ma y be noticeable during playing.
Position 0: The whole keyboard will pro-
duce the sounds of t he Violin
system.
Position 1 : The sounds of the Cello and
Violin systems are produced
below c
1
and above c#
1
res-
pecti vel y.
Position 2: The sounds of the Cello and
Violin systems are produced
below
f #
1
and above g
1
res-
pectively.
Position 3: The sounds of the Cello and
Violin systems are produced
below c
2
and above c#
2
res-
pecti vel y.
The K B D.SP LI T enables you to produce
chords of the Cello a nd melodies of Vio-
li n by you r lef t and right hands respec-
ti vel y.
SUSTA IN
The clockwise turn of t he SUSTAIN pro-
duces sustain effect of the Cello and
Violin Systems. I t permits a longer sustain
time after releasing the key as you turn the
knob to clockwise direction.
POWER
Insert the power cord plug into the AC
wall outlet, depress the .switch and power
is turned on. To turn off the power,
depress it again.
2 PILOT LA MP
This lamp indicates the power is on.
PITCH
Used to tune the instrument to the
interval
of
other
instruments.
Counter-
clockwise turn gives you lower interval
and clockwise turn, higher interval.
DETUNE
Produces a richer sound by giving a
beating sound. The center location of the
knob minimizes the beat.
VIBR A TO
DEPTH: The intensity of vibrato effect
becomes deeper as it is turned
clockwise.
If
it is kept all the
way to the left location, the
vibrato effect is not produced.
DELAY: Clockwise turn of the Delay
gradually delays the time until the
vibrato effect is produced after
the key is pressed.
4
