PERIODIC MAINTENANCE AND MINOR REPAIR
6-28
6
To replace the high beam headlight
bulb
1. Remove the headlight bulb holder
cover by turning it counterclock-
wise.
2. Disconnect the headlight coupler,
and then unhook the headlight
bulb holder.
3. Remove the defective bulb.
WARNING
EWA10790
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
ECA10650
Take care not to damage the follow-
ing parts:
●
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
●
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
1. Screw
1. Headlight bulb holder cover
1. Headlight coupler
2. Headlight bulb holder
U2C511E0.book Page 28 Friday, July 14, 2006 2:51 PM
Summary of Contents for STRATOLINER XV19CTSC
Page 1: ...2C5 28199 11 XV19CTSW C XV19CTW C XV19CTMW C OWNER S MANUAL LIT 11626 20 41...
Page 2: ...EAU10041 U2C511E0 book Page 1 Friday July 14 2006 2 51 PM...
Page 14: ...SAFETY INFORMATION 1 6 1 U2C511E0 book Page 6 Friday July 14 2006 2 51 PM...
Page 100: ...PRINTED IN JAPAN 2006 07 0 6 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD...