Perio
d
ic maintenance an
d
a
d
justment
7-36
7
2. Lift the wheel up between the fork
legs.
TIP
Make sure that there is enough space
between the brake pads before insert-
ing the brake disc and that the slot in
the speedometer gear unit fits over the
retainer on the fork leg.
3. Insert the wheel axle.
4. Lower the front wheel so that it is
on the ground, and then put the
sidestand down.
5. Tighten the wheel axle to the
specified torque.
6. Tighten the front wheel axle pinch
bolt to the specified torque.
7. While applying the front brake,
push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.
8. Connect the speedometer cable.
1. Speedometer gear unit
1. Speedometer gear unit
2. Retainer
3. Speedometer cable
Ti
g
htenin
g
torque:
Wheel axle:
59 Nm (5.9 m·kgf, 43 ft·lbf)
Ti
g
htenin
g
torque:
Front wheel axle pinch bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
U1BE26E0.book Page 36 Thursday, June 25, 2015 9:38 AM
