Yamaha Star XV19CTMC Owner'S Manual Download | Manualshive

Page: 83 / 102

background image

MOTORCYCLE CARE AND STORAGE

7-3

7

3. To prevent corrosion, it is recom-

mended to apply a corrosion pro-
tection spray on all metal,
including chrome- and nickel-plat-
ed, surfaces.

4. Use spray oil as a universal clean-

er to remove any remaining dirt.

5. Touch up minor paint damage

caused by stones, etc.

6. Wax all painted and chrome-plat-

ed surfaces. Avoid combination
cleaner waxes, many of which
contain abrasives that may mar
the paint or protective finish.

7. Let the motorcycle dry completely

before storing or covering it.

WARNING

EWA11130

●

Make sure that there is no oil or
wax on the brakes or tires.

●

If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent. Before riding at higher

speeds, test the motorcycle’s
braking performance and cor-
nering behavior.

CAUTION:

ECA10950

●

Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.

●

Never apply oil or wax to the
drive belt.

●

Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.

●

Avoid using abrasive polishing
compounds as they will wear
away the paint.

NOTE:

Consult a Yamaha dealer for advice on
what products to use.

Special care is needed for cleaning
the windshield and sidebags on this
model. Be sure to follow the instruc-
tions below.

Cleaning the windshield
Avoid using any alkaline or strong acid
cleaner, gasoline, brake fluid, or any
other solvent. Clean the windshield with
a cloth or sponge dampened with a
neutral detergent, and after cleaning,
thoroughly wash it off with water. For
additional cleaning, use Yamaha Wind-
shield Cleaner or other quality cleaner.
Some cleaning compounds for plastics
may leave scratches on surfaces of the
windshield. Before using them, make a
test by polishing an area which does
not affect your visibility.

Cleaning the sidebags
Water can be harmful to untreated
leather. Use Yamaha Saddle Soap or
another quality brand according to the
manufacturer’s directions to clean the
leather on the sidebags. Polish the dry
leather with a soft cloth, and then treat
with Yamaha Mink Oil or another high-
quality leather protectant for increased
water resistance.

U2C512E0.book Page 3 Tuesday, July 10, 2007 5:18 PM

«
...
81
82
83
84
85
...
»

Summary of Contents for Star XV19CTMC







































































































Reviews:

No comments

Related manuals for Star XV19CTMC

Brand: Bajaj Auto Pages: 38

Brand: kellermann Pages: 2

Soft Luggage Pannier Racks

Brand: Honda Pages: 10

Brand: hepco & becker Pages: 4

COMFORT 10130810

Brand: Contracor Pages: 36

Brand: Parweld Pages: 37

Brand: Suzuki Pages: 26

Grizzly Minicross RCX/12 50CC

Brand: Malaguti Pages: 33

Brand: Cycle Protect Pages: 15

Brand: hepco & becker Pages: 5

Brand: Yamaha Pages: 60

Brand: Yamaha Pages: 112

Evoline 3 Series

Brand: Shark Pages: 31

Brand: Shark Pages: 36

Brand: URAL Motorcycles Pages: 104

Brand: HAUL MASTER Pages: 8

POCKET BIKE QG-40

Brand: Coolster Pages: 13

Power Commander V

Brand: Dynajet Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands