20
■
The AUX IN jack
The ST7’s
AUX IN jack
!2
can be used to connect an external
stereo signal source to the ST7. Connecting a CD player,
tape recorder, etc. to the AUX IN jack with an audio cable
allows you to play along with an external audio source.
The
AUX IN jack’s
!2
signal level is controlled by the
AUX
IN VOLUME
o
control.
■
The LINE OUT Jack
The ST7’s
LINE OUT jack
!3
delivers the stereo signal of
the ST7 for connection to a stereo mixing console or tape
recorder for listening by external speakers or recording.
●
Make sure that the power of the ST7 and any external
equipment is turned OFF before making any
connections. Also, set the volume of any external
audio sources to the minimum level before
connecting. A high volume setting could result in
damage to the equipment, hearing impairments or
electrical shock.
●
The AUX OUT jack signal must never be returned to
the AUX IN jacks, either directly or through external
equipment. Doing so will result in the production of
feedback, and damage to the internal unit.
Using the AUX IN/LINE OUT Jacks
LINE OUT AUX IN
OFF
ON
POWER
!3
!2
DC10 -12V
INPUT
OUTPUT
Tape recorder
Tuning Meter
Speakers
Amplifier
Video
VCR
Silent Piano
Electronic Metronome
Tape recorder
CD Player
Stereo mini plug
For connection to a CD player,
e t c . u s e a n o n - r e s i s t a n c e
connection cable. If a resistance
type cable is used, the input signal
level (volume) is extremely low.
Please make sure of this point
when buying a connection cable.
