background image

47

All Models

Thirty (30) months from the original pur-

chase date.

WARRANTY TRANSFER:

 To trans-

fer any remaining warranty from the

original purchaser to any subsequent pur-

chaser, it is imperative that the machine

be inspected and registered for warranty

by an authorized Yamaha snowmobile

dealer in the country of residence of the

original purchaser. In order for this war-

ranty to remain in effect, this inspection

and registration must take place within

ten (10) days after ownership transfer.

YAMAHA MAKES NO OTHER

WARRANTY OF ANY KIND,

EXPRESSED OR IMPLIED. ALL

IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE

WHICH EXCEED THE OBLIGA-

TIONS AND TIME LIMITS

STATED IN THIS WARRANTY

ARE HEREBY DISCLAIMED BY

YAMAHA AND EXCLUDED FROM

THIS WARRANTY. SOME STATES/

PROVINCES DO NOT ALLOW

LIMITATIONS ON HOW LONG AN

IMPLIED WARRANTY LASTS, SO

THE ABOVE LIMITATIONS MAY

NOT APPLY TO YOU. ALSO

EXCLUDED FROM THIS WAR-

RANTY ARE ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES

INCLUDING LOSS OF USE. SOME

STATES/PROVINCES DO NOT

ALLOW THE EXCLUSION OR

LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO

THE ABOVE EXCLUSION MAY

NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU

SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER

RIGHTS WHICH VARY FROM

STATE TO STATE/PROVINCE TO

PROVINCE.

SPECIAL EARLY-SEASON 

WARRANTY EXTENSION

A special warranty extension is available

for all new Yamaha snowmobiles pur-

chased between May 1 and November 30.

All new Yamaha snowmobiles purchased

between May 1 and November 30 will

have the warranty extended to November

30 of the following year.

WARRANTY 

QUESTIONS AND 

ANSWERS

Q. What costs are my responsibility

during the warranty period?

A. The customer’s responsibility

includes all costs of normal mainte-

nance services, non-warranty repairs,

accident and collision damages, as

well as oil, spark plugs, clutch drive

belts, and slide runners.

Q. What are some examples of “abnor-

mal” strain, neglect, or abuse?

A. These terms are general and over-

lap each other in areas. Specific

examples include: Running the

machine out of oil, hitting an object

submerged under snow, operation

on surfaces other than snow or ice,

operating the machine with a bro-

ken or damaged part which causes

another part to fail, and so on. If

you have any specific questions on

operation or maintenance, please

contact your dealer for advice.

Q. May I perform any or all of the rec-

ommended maintenance shown in

the Owner’s Manual instead of hav-

ing the dealer do them?

A. Yes, if you are a qualified snowmo-

bile mechanic and follow the proce-

dures specified in the Owner’s and

Service Manual. We do recommend,

however, that items requiring spe-

cial tools or equipment be done by a

Yamaha snowmobile dealer.

Q. Will the warranty be void or can-

celed if I do not operate or maintain

my new Yamaha exactly as speci-

fied in the Owner’s Manual?

A. No. The warranty on a new Yamaha

cannot be “voided” or “canceled.”

However, if a particular failure is

caused by operation or maintenance

other than as shown in the Owner’s

Manual, that failure may not be

covered under warranty.

Summary of Contents for SR10RDG 2015























































Reviews: