Yamaha SR-PGB54P Owner'S Manual Download Page 106

Page: 106 / 141

102

Troubleshooting

■

iPod

In case of a transmission error without a status message appearing in the front panel and in the OSD, check the connection of your
iPod (page 22).

■

Bluetooth

Note

Status message

Cause

Remedy

See

page

This unit is in the middle of recognizing
the connection with your iPod.

This unit is in the middle of acquiring
song lists from your iPod.

Connect error

There is a problem with the signal path
from your iPod to this unit.

Turn off this unit and reconnect the Yamaha iPod
universal dock to the DOCK terminal of this unit.

Try resetting your iPod.

—

Unknown iPod

The iPod being used is not supported by
this unit.

This unit supports iPod touch, iPod (Click Wheel,
including iPod classic), iPod nano and iPod mini.

—

iPod connected

Your iPod is properly stationed in a
Yamaha iPod universal dock (such as
YDS-11, sold separately) connected to the
DOCK terminal of this unit, and the
connection between your iPod and this
unit is complete.

Disconnected

Your iPod was removed from a Yamaha
iPod universal dock (such as YDS-11,
sold separately) connected to the DOCK
terminal of this unit.

Station your iPod back in a Yamaha iPod universal
dock (such as YDS-11, sold separately) connected to
the DOCK terminal of this unit.

Unable to play

This unit cannot play back the songs
currently stored on your iPod.

Check that the songs currently stored on your iPod
are playable.

—

Store some other playable music files on your iPod.

—

Status message

Cause

Remedy

See

page

Searching...

The Bluetooth receiver and the Bluetooth
component is in the middle of the pairing.

The Bluetooth receiver and the Bluetooth
component is in the middle of
establishing the connection.

Completed

The paring is completed.

Canceled

The paring is canceled.

BT connected

The connection between the Yamaha
Bluetooth wireless audio receiver (such
as YBA-10, sold separately) and the
Bluetooth component is established.

Disconnected

The Bluetooth component is
disconnected from the Yamaha Bluetooth
wireless audio receiver (such as YBA-10,
sold separately).

No BT receiver

The Bluetooth receiver is not connected
to the DOCK terminal.

Connect the Yamaha Bluetooth wireless audio
receiver (such as YBA-10, sold separately) to the
DOCK terminal.

Summary of Contents for SR-PGB54P














































































































































Search results

Summary of Contents for SR-PGB54P

Reviews:

Related manuals for SR-PGB54P

Brands by name

Popular brands

Yamaha SR-PGB54P, Owner'S Manual

Search results

Summary of Contents for SR-PGB54P

Reviews:

Related manuals for SR-PGB54P

Brands by name

Popular brands