manualshive.com logo in svg

Yamaha SP2060, Owner'S Manual

The Yamaha SP2060 Owner's Manual is a comprehensive guide essential for maximizing the potential of this powerful audio processing unit. Available for free download, this manual provides detailed instructions, settings, and troubleshooting tips, enabling users to achieve superior sound quality. Get your copy from our website today.

Share
Download
background image

References

SP2060 Owner’s Manual

Fore

w

o

rd

Netw

ork Settings

Ref

erences

P

anel Operation

Intr

oduction 

to the SP2060

The Contr

ols 

and Connector

s

44

Display Messages

Warning and error messages

* Do NOT turn off the power to the SP2060 while the unit displays the message “DO NOT TURN OFF!” at the bottom of the display.

Message 

Meaning 

Action

Duplicate IP Adr. 

Duplicate IP addresses. 

Change the IP addresses so that there are no duplicates. 

Illegal MAC Adr. 

An illegal MAC address has been encountered. 

This could be due to a hardware malfunction. Refer this 
problem to a contact a Yamaha dealer.

Invalid IP Adr. 

The IP address is not set properly. 

Set an appropriate network IP address. 

Network Error 

A cable is disconnected, the power to the 
connected switching hub or router is turned off, or a 
cable is not in proper condition. 

Connect the cables properly, and make sure that the hub 
and/or router are operating correctly. 

No MAC Adr. 

MAC address not specified. 

This could be due to a hardware malfunction. Refer this 
problem to a Yamaha dealer.

No Battery 

The internal battery is completely discharged or not 
installed. 

If you turn off the power to the unit, the current settings will 
be lost and reset to the default values. Stop operating the 
unit, and contact a Yamaha dealer for battery replacement. 

Critical Battery 

The internal battery is almost discharged. Your data 
may be lost. 

If you turn off the power to the unit, the current settings may 
be lost and reset to the default values. Stop operating the 
unit, and contact a Yamaha dealer for battery replacement.

Low Battery 

The backup battery voltage is low. 

This does not affect the operation of the unit. However, if you 
continue using the unit, the settings may be lost and reset to 
the default values. Contact a Yamaha dealer for battery 
replacement at your earliest convenience. 

Recovering 

A program update attempt has failed, and the 
previous program is currently being restored. 

Do NOT turn power off while the unit is displaying this 
message. If the update attempt repeatedly fails, there may 
be a hardware malfunction. Refer this problem to a Yamaha 
dealer.

Scene Recall Err

A scene recall attempt has failed.

Recall the scene again.
If the problem persists, contact a Yamaha dealer.

Saving Failed 

A save operation has failed. 

This could be due to a hardware malfunction. Refer this 
problem to a Yamaha dealer.

Param Access Err 

Current setting cannot be displayed. 

Save the current setting by using DME Designer, then 
initialize the unit. If the problem persists, contact a Yamaha 
dealer.

Param Set Err 

Current setting cannot be changed. 

W.Clk Unlocked 

A usable word clock signal is not being received or 
cannot be detected. 

Recheck all word clock connections and internal 
parameters. 

DevGrp Sync Err

The device group configuration set via DME 
Designer does not match the real configuration.

Use DME Designer to go off-line, create a configuration that 
correctly matches the actual configuration, and then go 
back on-line to synchronize the configuration.

System Error

A system error has occurred.

Save the current setting by using DME Designer, then 
initialize the unit. If the problem persists, contact a Yamaha 
dealer.

Summary of Contents for SP2060


























































Reviews:

No comments

Related manuals for SP2060

Lab.gruppen NLB 60E Operation Manual preview
NLB 60E
Brand: Lab.gruppen Pages: 35
Commell LS-570 User Manual preview
LS-570
Brand: Commell Pages: 58
Paradyne Hotwire 5100 User Manual preview
Hotwire 5100
Brand: Paradyne Pages: 45
ZALMAN CNPS12X User Manual preview
CNPS12X
Brand: ZALMAN Pages: 11
AMD Geode LE-366 User Manual preview
Geode LE-366
Brand: AMD Pages: 45
S&T TPMS1209T02-ER User Manual preview
TPMS1209T02-ER
Brand: S&T Pages: 28
2N Telekomunikace ATEUS STARGATE User Manual preview
ATEUS STARGATE
Brand: 2N Telekomunikace Pages: 67
JAKA MiniCab Hardware User Manual preview
MiniCab
Brand: JAKA Pages: 37
Renesas H8S/2646 Series User Manual preview
H8S/2646 Series
Brand: Renesas Pages: 20
National Instruments IMAQTM User Manual preview
IMAQTM
Brand: National Instruments Pages: 121
Microchip Technology PD-9501-10GCO/AC User'S Installation Manual preview
PD-9501-10GCO/AC
Brand: Microchip Technology Pages: 41
Vivotek ND8212W Hardware Installation Manual preview
ND8212W
Brand: Vivotek Pages: 46
Robotis OpenCM 485 Manual preview
OpenCM 485
Brand: Robotis Pages: 10
Infoblox ND-2200 Installation Manual preview
ND-2200
Brand: Infoblox Pages: 44
Clare Controls ClareVision CV-M161620-04 Installation Manual preview
ClareVision CV-M161620-04
Brand: Clare Controls Pages: 32
Sun Microsystems UltraSPARC-I User Manual preview
UltraSPARC-I
Brand: Sun Microsystems Pages: 410
G&D ControlCenter-IP 2.0 Installation Manual preview
ControlCenter-IP 2.0
Brand: G&D Pages: 60
OPTO 22 BD-DEVNET User Manual preview
BD-DEVNET
Brand: OPTO 22 Pages: 28

Brands by name

Popular brands

Load more brands