SLB300 PRO SLB300 Owner’s Manual
16
Preparing the Power Supply (How to Replace Batteries)
The SILENT Bass
TM
uses batteries for its power source.
Before installing or removing the batteries, remove the cable from the output jack.
1.
On the backside of the instrument, push
down the battery case's latch in the direction
of the “OPEN” arrow to remove the battery
case.
2.
Insert the batteries into the case. Referring to
the illustration, make sure the batteries are
placed in the case with the polarity (+/-) prop-
erly aligned.
3.
Push in the battery case all the way until you
hear a click.
When to Replace the Batteries
• When the batteries are running low, the status display LED flashes in red. Promptly replace the
batteries.
• With nickel hydride batteries, the discharge properties may cause the power to turn off before the
LED flashes in red.
• When removing the battery case, tilt the instru-
ment body at an angle to prevent the battery
case from flying out.
AA batteries
(alkaline or
nickel hydride)
Latch
Battery case
NOTICE
Be careful of the following when replacing the batteries.
• Battery shapes (battery terminals and external shapes, etc.) vary depending
on the battery manufacturer. Inserting a battery with a shape different from
the battery case may damage the instrument or the like. Even if the batteries
fit in, poor contact with the terminals can cause a fire.
• Always follow the polarity signs (+/-) when inserting batteries. Improper
insertion can cause a fire.
• If not using the instrument for a long period of time, remove the batteries
from the instrument. Failure to do so can cause battery drainage or damage
to the instrument due to battery leakage.
