14
Power Supply
The SILENT Bass
TM
uses a battery as its power source.
Before installing or removing the battery, remove the cable from the output jack.
1
On the backside of the instrument, push down on the battery case’s latch below the “OPEN” arrow
to remove the battery case.
•
Be careful when removing the battery case. Depending upon the angle of the instrument, the
case can suddenly jump out.
2
Insert the battery (6F22(S-006P)9V battery) into the case. Referring to the illustration below,
make sure that the battery is placed in the case with its poles (+/-) properly aligned.
3
Push the case into the slot until you hear the latch “click”.
battery
compartment
6F22 (S-006P)
9V battery
Latch
When the battery is low, the lamp will dim and the sound may become distorted or noisy.
When these symptoms occur, please take note of the following precautions and replace the battery.
Caution! When Replacing the Battery
If the battery is slightly smaller than the
case, make a spacer from some thick
paper or cardboard and insert the spacer
between the end of the battery and the
battery case to hold the battery in place.
• When replacing the battery, purchase a replacement battery that properly fits the battery holder
(battery designs differ among makers). Too big a battery may damage the instrument. Too small a
battery may result in poor conductivity.
• A
lways follow the +/– signs when inserting the battery. Improper insertion may result in fire.
• T
o prevent possible damage to the unit due to battery leakage and unnecessary power drain, remove
the battery from the unit when it is not going to be used for an extended period of time.
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
* For customers in the Netherlands
