background image

Contents

Introduction

Introduction 1
Parts diagram  

2

WARNINGS 3
Fit rubber seal 

6

before first use!
Getting started 

8

Battery use 

12

Charging the Battery Pod 

16

Care & Maintenance 

19

Trouble Shooting 

21

Technical Specifications 

26

1

Discarded electrical appliances are 

recyclable and should not be discarded 

in the domestic waste! Please actively 

support us in conserving resources and 

protecting the environment by returning 

this appliance to the collection centers 

(if available).

Thank you for having Choosing the SEASCOOTER

 275L – 

the ultimate dive propulsion vehicle for professional divers.

(Only use the seascooter for scuba diving if you are a 

qualified diver)

Use appropriate equipment such as wetsuit, buoyancy 

control device, fins, mask & snorkel, surface signaling 

device, regulator(s) approved life jacket etc. when 

operating the seascooter.

Only operate the Seascooter in water.

• Speed up to 3.3 mph / 5.3 km/h
• Run up to 2 hours with normal use
• Rated to130ft / 40m
• Weight just 32.4 lbs / 14.7 kg including battery
There are many features incorporated in this sophisticated 
design. These include soft start power circuit, battery status 
indicator, water ingress alert, overheating protection, 
adjustable buoyancy, safety grilles, retractable rubber 
handle, auto shut off when triggers are released and master 
safety lock.
Please take a little time to study this manual to learn about 
them all to get the most out of your 275L.

 

The Seascooter is designed for use in seawater. It will 

have less buoyancy in fresh water, lake or pool and 

may sink in such waters.

• The seascooter is designed for 1 person use

• The seascooter is not a life saving device. Do not use it as 

a buoyancy aid

Warning

Summary of Contents for SEASCOOTER 275L

















Reviews: