Yamaha S-80, Service Manual

Page: 10 / 45

S80
10
[282]
[62] [64]
[63]
[102]
[102]
[62]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)
[63]: Bonding Tapping Screw-B 3.0X10 MFZN2BL (VQ049800)
[64]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[282]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)
Fig.4
Fig.5
[102]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)
9. DM Circuit Board
9-1 Open the control panel assembly. (See procedure 1.)
9-2 Remove the JK circuit board. (See procedure 8.)
9-3 Remove the seven (7) screws marked [282]. The
DM shield cover can then be removed. (Fig. 4)
9-4 Remove the three (3) screws marked [63]. (Fig. 4)
9-5 Remove the two (2) screws marked [62] and the screw
marked [64] from the DM circuit board.
Be careful of the harness clamp, which is also installed
there. (Fig. 5)
10. Wheel Assembly
10-1 Open the control panel assembly. (See procedure 1.)
10-2 Remove the JK circuit board. (See procedure 8.)
10-3 Remove the four (4) screws marked [102]. The wheel
assembly can then be removed. (Fig. 5)
〈
BOTTOM VIEW
〉
〈
REAR VIEW
〉
〈
BOTTOM VIEW
〉