CONNECTIONS
Connecting speakers
En
20
■
Connecting subwoofers
1
Connect the subwoofer input jack to the
SUBWOOFER 1 or 2 jack on this unit with an audio
pin cable.
2
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
NOTE
After connection, applying this setting to this unit is required to
activate all speaker connections. With using “Power Amp
Assign” function, you can easily apply the speaker
configuration.
Refer to “Power Amp Assign” (
☞
p. 99
) for details on using
“Power Amp Assign” function.
VOLUME
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
MAX
Subwoofer examples
Summary of Contents for RX-V867BL
Page 1: ...Owner s Manual AV Receiver English for U S A ...
Page 144: ... 2010 Yamaha Corporation YD000A0 OMEN ...
Page 161: ......
