Yamaha RX-V867BL, Owner'S Manual

Page: 102 / 167

SETUP
Setting various functions (Setup menu)
En
102
Parametric EQ
Adjusts sound quality of tone using a parametric
equalizer.
PEQ Select
Select an equalizer type.
PEQ Data Copy
Select 1 of the 3 parametric equalizer types acquired with
automatic setup and manually copy that information to the
manual adjustments.
Front L / Front R / Center / Surround L / Surround R /
Surround Back L / Surround Back R / Front Presence L /
Front Presence R
The parametric equalizer can be used to manually adjust
sound quality for individual speakers.
Set “PEQ Select” to “Manual” and use “PEQ Data
Copy” to copy information acquired with automatic
setup. This information can be used as a basis for
performing manual adjustments.
1 Use
k
Cursor
B
/
C
repeatedly to select
“Band / Gain,” “Freq. / Gain,” or “Q / Gain”
and press
k
ENTER .
2
Use
k
Cursor
D
/
E
repeatedly to adjust the
parameter and use k Cursor
B
/
C
repeatedly to adjust the gain.
3 Press
k
ENTER to exit the edit window.
4
Repeat steps 1 to 3 to configure other
parameters.
5
Press
j
ON SCREEN to close the menu.
Test Tone
Turns the test tone generator on or off.
ENTER
ON SCREEN
SCENE
RETURN
VOLUME
ENHANCER SUR. DECODE
STRAIGHT SLEEP PURE DIRECT PARTY
MOVIE MUSIC
BD
DVD
TV CD RADIO
MUTE
7 8 5 6
9 0 10
1 2 3 4
REC
ENT
FM
INFO MEMORY
AM
PRESET
HDMI
AV
AUDIO
1 2 3 4
1 2 5 V-AUX
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
MAIN ZONE 2
RECEIVER
CODE SET
INPUT
MUTE
DOCK
HDMI OUT
MULTI
OPTION
5
1 2 3 4
6
NET SIRIUS TUNER
TUN./CH
CATEGORY
k
j
j
ON SCREEN
k
Cursor
B
/
C
/
D
/
E
k
ENTER
Manual Manually adjust equalizer sound.
Flat Adjust individual speakers to achieve the
same characteristics. Select this option if
speakers offer the same quality.
Front Adjust individual speakers to achieve the
same characteristics as the front left and
right speakers. Select this option if front
left and right speakers offer significantly
greater quality than other speakers.
Natural
Adjust all speakers to achieve a natural
sound. Select this if high-frequency
sounds seem too strong when “PEQ
Select” is set to “Flat.”
Through (Default) Disable the equalizer.
Flat > Manual
Copy the “Flat” parametric equalizer
information acquired with automatic
setup.
Front > Manual
Copy the “Front” parametric equalizer
information acquired with automatic
setup.
Natural > Manual Copy the “Natural” parametric equalizer
information acquired with automatic
setup.
To reset all parameter settings for the selected
speaker, select “Reset to Flat” and press
k ENTER
.
Off
(Default) Does not generate test tones.
On Generates test tones. While “On” is
selected, test tones are produced
constantly.
You can use the test tone in a variety of
circumstances. For example, you can adjust the
volume balance settings for each speaker, or whenever
you adjust the settings on the internal parametric
equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you
have finished making adjustments.