PREPARATIONS
➤
Connecting a TV
En
26
3
Configure the settings for HDMI Control.
a
Enable HDMI Control on the TV and playback devices (such as a HDMI
Control-compatible BD/DVD player).
b
Turn off the TV’s main power and then turn off the unit and playback devices.
c
Turn on the unit and playback devices and then turn on the TV.
d
Switch the TV input to display video from the unit.
e
Check the following.
On the unit
: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV
: The video from the playback device is displayed.
f
Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks or
if you want to use another input jack (other than OPTICAL) for connecting the TV, use “TV Audio Input”
(p.96) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.46),
you also need to change the input assignment for SCENE(TV).
■
Connection Method 3 (TV with HDMI input jacks)
Connect the TV to the unit with an HDMI cable and a digital optical cable.
If you switch the input source of the unit to “AV 4” using the AV 4 or SCENE(TV) keys,
the TV audio will be played back on the unit.
• By connecting a TV to the unit with an HDMI cable, any video input to the unit can be output to the TV
(except some component video signals), regardless of the method used to connect the video device to the
unit. For details, see “Video signal flow” (p.126).
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
• If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO 1–2 jacks. To use
the SCENE function (p.46), you also need to change the input assignment for SCENE(TV).
• (RX-V775 only)
You can connect another TV or a projector by using the HDMI OUT 2 jack (p.27).
AUDIO 1
AUDIO 2
OPTICAL
OPTICAL
COAXIAL
VIDEO
AV4
AV
3
AV2
AV 1
(TV)
P
B
Y
P
R
VIDE
MO
H
(BD
1
2
ARC
ANTENNA
FM
AM
AV 5
VIDEO
AV 6
AV OUT
ZONE O
ZONE
NETWORK
DC OUT
TRIGGER OUT
REMOTE
5V
0.5A
(NET)
12V
IN
OUT
0.1A
COMPONENT VIDEO
HDMI OUT
(RADIO)
OPTICAL
O
O
HDMI
HDMI
1
2
OUT
ARC
HDMI
HDMI
OPTICAL
AV4
(TV)
The unit (rear)
HDMI OUT jack
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
HDMI input
1 2 3
TV connection
4 5 6 7 8 9 10
Summary of Contents for RX-V775
Page 139: ...2013 Yamaha Corporation YF236A0 EN...
