background image

SERVICE MANUAL

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product  may result in personal
injury, destruction of expensive components, and failure of the  product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA
Retailer or the appointed service representative.

IMPORTANT:

The presentation or sale of this manual to any individual or firm does not constitute authorization,  certification  or
recognition  of  any  applicable  technical  capabilities,  or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering, and service
departments of YAMAHA are continually striving  to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.

WARNING:

Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT:

Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.

IMPORTANT NOTICE

1 0 0 9 3 9

SERVICE MANUAL

RX-V757/DSP-AX757/DSP-AX757SE

RX-V657/HTR-5860

AV RECEIVER/AV AMPLIFIER

DISPLAY DATA  . . . . . . . . . . . . . . . . . . . . . . . . . . 51–52
IC DATA  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53–61
PIN CONNECTION DIAGRAM  . . . . . . . . . . . . . . . . . 62
BLOCK DIAGRAM  . . . . . . . . . . . . . . . . . . . . . . . . 63–64
PRINTED CIRCUIT BOARD  . . . . . . . . . . . . . . . . 65–84
SCHEMATIC DIAGRAM  . . . . . . . . . . . . . . . . . . . 85–95
PARTS LIST  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97–133
REMOTE CONTROL RAV272, RAV273  . . . . 134–135
REMOTE CONTROL RAV252, RAV253  . . . . 136–137

■ 

CONTENTS

TO SERVICE PERSONNEL  . . . . . . . . . . . . . . . . . . 2–3
FRONT PANELS  . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5
REMOTE CONTROL PANELS  . . . . . . . . . . . . . . . . . . 6
REAR PANELS  . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–12
SPECIFICATIONS / 

参考仕様  . . . . . . . . . . . . . . . . .

13–17

INTERNAL VIEW  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DISASSEMBLY PROCEDURES / 

分解手順  . . . . .

19–27

SELF DIAGNOSIS FUNCTION (DIAG) /

自己診断機能(ダイアグ)

 . . . . . . . . . . . . . . . . . . . . 28–49

AMP ADJUSTMENT / 

アンプ部調整  . . . . . . . . . . . . . . .

50

RX-V757/DSP-AX757/DSP-AX757SE

RX-V657/HTR-5860

  

  ’05.03

Summary of Contents for RX-V757

















































Reviews: