How to place speakers (speaker systems)
n
Using 7.1/5.1.2-channel system
This speaker system brings out the full performance of the unit and allows you to enjoy
a highly-natural 3-dimensional sound field with any contents. We recommend this
speaker system to have a full effect of Dolby Atmos or DTS:X contents.
NOTE
▪ The surround back speakers and presence speakers do not produce sounds simultaneously. The unit
automatically changes the speakers to be used, depending on the input signal and CINEMA DSP 3D.
▪ When installing the presence speakers on the ceiling above the listening position, or when using Dolby
Enabled speakers as the presence speakers, the presence speaker layout settings must be changed. For
details, see the following:
– “Setting the layout of the presence speakers” (p.98)
▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit.
4
1
2
9
9
5
3
7
6
R
10° to 30°
10° to 30°
0.5 to 1 m
(1.6 to 3.3 ft)
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m (5.9 ft)
1.8 m (5.9 ft)
0.3 m (1 ft) or more
SURROUND
CENTER
FRONT
SURROUND BACK
/ ZONE2 / BI-AMP
SPEAKERS
F.PRESENCE
EXTRA SP1
EXTRA SP2
/ ZONE2
1
2
SUBWOOFER
PRE OUT
FRONT
ZONE OUT
ZONE 2
3
76
1
2
5
9 9
4
RE
En
20