50
En
You can call the setup menu using the remote control and change the settings of various menus.
You can change the following settings in the setup menu. For details, read “Basic operation of the setup menu” first, and
see the respective pages.
Operating various settings for this unit (Setup menu)
Menu/Submenu
Function
Page
Speaker Setup
Sets items for speakers.
1 Auto Setup (YPAO)
Automatically adjusts output characteristics of speakers.
2 Manual Setup
Manually adjusts output characteristics of speakers.
A)Config
Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
B)Level
Separately adjusts volume of each speaker.
C)Distance
Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
D)Equalizer
Selects an equalizer that adjusts speaker output characteristics.
E)Test Tone
Generates test tones.
Sound Setup
Sets various items for sound outputs.
1 Dynamic Range
Adjusts dynamic ranges of speakers and headphones.
2 Lipsync
Adjusts delay in output timing between video signals and audio signals.
HDMI Auto
Sets on or off of automatic adjustments for delay between output timing between
video signals input from the HDMI jack and audio signals.
Auto Delay
Fine adjusts a delay time of HDMI Auto.
Manual Delay
Manually fine adjusts the delay of audio and visual output.
Function Setup
Set various items for HDMI and display.
1 HDMI
Sets various items for input sources.
Standby Through
Selects on or off of output of HDMI signals input from the HDMI IN jack to the
HDMI OUT jack when this unit is on standby.
Audio Output
Selects this unit or a component connected to this unit via the HDMI OUT jack of
this unit for reproducing sound signals input from the HDMI IN jack.
Resolution
Sets resolution of the HDMI output that is converted from analogy visual input
signals.
Aspect
Set an aspect ratio of images reproduced by HDMI signals converted from analog
video input signals.
2 Display
Set items for a monitor or the front panel display.
Dimmer
Sets brightness of the front panel display.
FL Scroll
Selects the way to display characters on the front panel display.
OSD Shift
Adjusts top and bottom positions of the screen displayed on the video monitor.
3 Volume
Sets items for volumes.
Adaptive DRC
Adjust the dynamic range (difference between the maximum volume and the
minimum volume) in conjunction with the volume level.
Max Volume
Sets the maximum volume level so that the volume will not be accidentally
increased.
Init. Volume
Sets the volume at the time this unit is turned on.
4 Input Rename
Changes input source names to be displayed on a video monitor or the front panel
display.
5 Zone2
Sets the maximum volume level and initial volume level of Zone2.
Max Volume
Sets the maximum volume level so that the volume will not be accidentally
increased.
Init. Volume
Sets the volume at the time this unit is turned on.
DSP Parameter
Sets parameters for the sound field programs.
Memory Guard
Protects some settings against accidental alteration.
Summary of Contents for RX-V665BL
Page 1: ...RX V665 AV Receiver OWNER S MANUAL U ...
Page 2: ......
Page 91: ......
Page 92: ... 2009 Yamaha Corporation All rights reserved Printed in China WQ95310 ...