background image

PREPARATIONS

Optimizing the speaker settings automatically (YPAO)

En

41

Warning messages

If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.

However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.

TV screen

Front display

Procedure to handle warnings

1

Check the content of warning message 
and press ENTER.

2

Use the cursor keys (

e

/

r

) to select the 

desired operation.

To save the measurement results:

Select “SAVE” and press ENTER.

To discard the measurement result:

Select “CANCEL” and press ENTER.

3

Disconnect the YPAO microphone from the 
unit.

Warning 
message

A u t o   S e t u p

S t a r t

E x i t

M e a s u r e m e n t  

F i n i s h e d

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

-3.0 / +10.0 dB

W-1:Out of Phase

OK:ENTER

MUTE

ENHANCER STEREO TUNED

SLEEP

OUT

ECO

CHARGE

ADAPTIVE DRC

VIRTUAL

W-1:PHASE

VOL.

Problem speaker (blinks)

• Texts in parentheses denote indicators on the front display.

Warning message

Cause

Remedy

W-1:Out of Phase
(W-1:PHASE)

A speaker cable may be connected with the 
reverse polarity (+/-).

Check the cable connections (+/-) of the problem speaker.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker cable.

If the speaker is connected correctly:

Depending on the type of speakers or room environment, this 
message may appear even if the speakers are connected 
correctly. In this case, you can ignore the message.

W-2:Over Distance
(W-2:DISTANCE)

A speaker is placed more than 24 m (80 ft) 
from the listening position.

Exit YPAO, turn off the unit, and place the problem speaker 
within 24 m (80 ft) of the listening position.

W-3:Level Error
(W-3:LEVEL)

There are significant volume differences 
between the speakers.

Check the usage environment and cable connections (+/-) of 
each speaker, and the volume of the subwoofer. If there is 
any problem, exit YPAO, turn off the unit, and then reconnect 
speaker cable or correct the speaker positions. We 
recommend using the same speakers or speakers with 
specifications that are as similar as possible.

00_RX-V477_V577_om_U.book  Page 41  Monday, November 11, 2013  1:19 PM

Summary of Contents for RX-V477























































































































































Reviews: