PREPARATIONS
➤
Placing speakers
En
12
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout
examples.
*1 RX-V577 only
*2 Place the surround speakers in front and set "Virtual CINEMA FRONT" (p.81) in the "Setup" menu to "On".
• RX-V577 supports 2- to 7.1-channel system, and RX-V477 supports 2- to 5.1-channel speaker system.
• (RX-V577 only)
You can connect two subwoofers (with built-in amplifier) to the unit. Two subwoofers connected to the unit output the same sounds.
1
Placing speakers
Caution
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6
Ω
MIN”. For details, see “Setting the speaker impedance” (p.15).
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6
Ω
.
Speaker type
Abbr.
Function
Speaker system (the number of channels)
7.1*
1
6.1*
1
5.1
5.1
(Virtual
CINEMA
FRONT)
4.1
3.1
2.1
Front (L)
1
Produce front left/right channel sounds (stereo sounds).
●
●
●
●
●
●
●
Front (R)
2
●
●
●
●
●
●
●
Center
3
Produces center channel sounds (such as movie dialogue and vocals).
●
●
●
●
●
Surround (L)
4
Produce surround left/right channel sounds.
●
●
●
●
*
2
●
Surround (R)
5
●
●
●
●
*
2
●
Surround back (L)*
1
6
Produce surround back left/right channel sounds.
●
Surround back (R)*
1
7
●
Surround back*
1
8
Produces sounds mixed from surround back left/right channel sounds.
●
Subwoofer
9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
●
●
●
●
●
●
●
1 2 3 4 5 6 7 8 9 10 11
00_RX-V477_V577_om_U.book Page 12 Monday, November 11, 2013 1:19 PM
Summary of Contents for RX-V477
Page 135: ...GYAMAHA YAMAHA CORPORATION 2014 Yamaha Corporation Printed in Malaysia ZK13590 ...
Page 144: ......
Page 145: ......
Page 146: ...RX V577 RX V477 ...