Yamaha RX-V471 Owner'S Manual Download Page 15

Page: 15 / 119

The unit is equipped with the following input/output jacks. Use jacks and cables appropriate for devices.

Audio/video jacks

HDMI jacks

Digital videos and sounds are transmitted. Use an HDMI
cable for connection.

• Use a 19-pin HDMI cable with the HDMI logo. Using an HDMI cable

less than 5.0 m (16.4 ft.) long is recommended to prevent signal

quality degradation.

• When connecting an external device with a DVI jack, use an HDMI/

DVI-D cable.

• The HDMI control function, the Audio Return Channel function and

transmission of 3D content are supported.

Analog video jacks

COMPONENT VIDEO jacks

The signal is separated into three devices:
Luminance (Y), chrominance blue (PB) and
chrominance red (PR).
Use a component video pin cable with three plugs.

VIDEO jack

This jack transmits conventional analog video signal.
Use a video pin cable.

Audio jacks

OPTICAL jacks

These jacks transmit optical digital audio signals. Use
fiber-optic cables for connection. Remove the cap
before using if needed.

COAXIAL jacks

These jacks transmit coaxial digital audio signals. Use
coaxial cables.

AUDIO jacks

These jacks transmit conventional analog audio signals.
Use stereo pin cables.

PORTABLE jack

This jack transmits conventional analog audio signals.
Use a stereo mini-plug cable when connecting.

Cable plugs and jacks

HDMI cable

Component video cables

Red

Blue

Green

Video pin cable

Digital optical cable

Digital coaxial cable

Stereo pin cable

Stereo mini-plug cable

Summary of Contents for RX-V471
























































































































Search results

Summary of Contents for RX-V471

Reviews:

Related manuals for RX-V471

Brands by name

Popular brands

Yamaha RX-V471, Owner'S Manual

Search results

Summary of Contents for RX-V471

Reviews:

Related manuals for RX-V471

Brands by name

Popular brands