En
12
Select the speaker layout depending on the numbers of speakers, and then place the speakers and subwoofer (with a built-in amplifier) in the room.
The following section describes the representative speaker configuration of 2.1 to 5.1 channel system.
• To get recommended speaker layout, refer to “Ideal speaker layout” (p.83).
1
Speaker layout
NOTES
• (U.S.A. and Canada models only) The unit is configured to 8
Ω
speakers as the factory setting. 6
Ω
speakers can be also connected. For details on settings for 6
Ω
speaker connection, refer to “Changing the speaker
impedance (U.S.A. and Canada models only)” (p.72).
• (Except for U.S.A. and Canada models) Use speakers with an impedance of at least 6
Ω
.
Type of speakers
Abbr.
Function
Speaker system
(the number of channels)
5.1
4.1
3.1
2.1
Front (L)
For the front channel sound (stereo sound) and effect sound
●
●
●
●
Front (R)
●
●
●
●
Center
For the center channel sound (dialogue, vocals, etc.)
●
●
Surround (L)
For effect and vocal sound from surround channel. The surround back channel sound is output from the surround speakers
when 7.1- or 6.1-channel sounds are input.
●
●
Surround (R)
●
●
Subwoofer
For low-frequency effect (LFE) sound and bass sound from front and surround channels.
●
●
●
●
1
Speaker layout
2 3 4 5 6 7 8
Summary of Contents for RX-V471
Page 91: ... 2011 Yamaha Corporation YD338B0 OMEN2 ...
Page 117: ......
