Quick start guide
9
En
English
INTR
ODUCTION
Case C:
“I want to listen to a music program from
the FM radio station...”
Press
F
SCENE
4 (or
E
SCENE
4) to select
“Radio Listening”.
• To use the “Radio Listening” template, you must tune into
the desired radio station in advance. See pages 40 to 42 for
tuning information.
• To achieve the best possible reception, orient the
connected AM loop antenna, or adjust the position of the
end of the indoor FM antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 28 for details.
■
After using this unit...
Press
1
STANDBY/ON
on the front panel to set
this unit to the standby mode.
This unit is set to the standby mode. In the standby mode,
this unit consumes a small amount of power in order to
receive infrared signals from the remote control. To turn
on this unit from the standby mode, press
1
STANDBY/
ON
(or
M
POWER
). See page 21 for details.
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
Notes
Note
What do you want to do with this
unit?
■
Customizing the SCENE templates
• Using various SCENE templates
• Creating your original SCENE templates
■
Using various input sources
• Basic controls of this unit
• Enjoying FM/AM radio programs
• Using your USB portable device with this
unit
■
Using various sound features
• Using various sound field programs
• Using the pure direct mode for the high
fidelity sound
• Customizing the sound field programs
■
Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
• Manually adjusting various parameters of
this unit
• Setting the remote control
• Adjusting the advanced parameters
■
Additional features
Automatically turning off this unit
