Yamaha RX-V457 Owner'S Manual Download Page 65

Page: 65 / 88

ADVANCED SETUP MENU

ANCED

OPERA

ION

The ADVANCED SETUP menu is displayed in the front
panel display.

• During the advanced setup procedure, audio output is muted.
• During the advanced setup procedure, only the STANDBY/ON,

STRAIGHT (EFFECT) and PROGRAM

buttons on the

front panel are available for operation.

Be sure to set the speaker impedance before using this unit
to play back audio or video signals.

Turn off the power to this unit, and while
holding down STRAIGHT (EFFECT), press
STANDBY/ON.

This unit turns on, and the ADVANCED SETUP
menu appears in the front panel display.

Press PROGRAM

repeatedly to move

through the menu and select the item you
want to set up.

See the end of this section for a complete list of
available parameters.

Press STRAIGHT (EFFECT) repeatedly to
toggle between the available parameters.

Press STANDBY/ON to confirm your
selection.

This completes the advanced setup procedure.
The settings you made are reflected the next time this
unit’s power is turned on.

ADVANCED SETUP MENU

CAUTION

(U.S.A. model)

VOLUME

AUTO/MAN'L MONO

VIDEO

L AUDIO R

MAN'L/AUTO FM

LEVEL

NEXT

EDIT

EFFECT

MEMORY

FM/AM

PRESET/TUNING

A/B/C/D/E

PROGRAM

BASS/TREBLE

TUNING MODE

INPUT MODE

TONE CONTROL

STRAIGHT

SPEAKERS

PHONES

SILENT CINEMA

STANDBY

/ON

MULTI CH

INPUT

VIDEO AUX

INPUT

SEARCH MODE

CATEGORY

PRESET/TUNING/CH

DISPLAY

1,3

1,4

EFFECT

STRAIGHT

STANDBY

/ON

While holding
down, press

PROGRAM

EFFECT

STRAIGHT

STANDBY

/ON

Summary of Contents for RX-V457

























































































Search results

Summary of Contents for RX-V457

Reviews:

Related manuals for RX-V457

Brands by name

Popular brands

Yamaha RX-V457, Owner'S Manual

Search results

Summary of Contents for RX-V457

Reviews:

Related manuals for RX-V457

Brands by name

Popular brands