Yamaha RX-V457 Owner'S Manual Download Page 33

Page: 33 / 88

PLAYBACK

OPERA

ION

• Some 6.1-channel compatible discs do not have a signal (flag)

which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel, select a decoder manually
(PLIIx Music, EX/ES or EX).

• 6.1-channel playback is not possible even if EXTD SUR. is

pressed in the following cases:
– When “SUR. LR” (see page 56) or “SUR. B” (see page 56) is

set to NONE.

– When the source connected to the MULTI CH INPUT jack is

being played.

– When the source being played does not contain surround left

and right channel signals.

– When a Dolby Digital KARAOKE source is being played.
– When “2ch Stereo” or “Direct Stereo” is selected.

• When the power of this unit is turned off, this setting will be

reset to AUTO.

• The Pro Logic IIx decoder is not available when “SUR. B” is set

to NONE (see page 56).

■

Enjoying 2-channel software in surround

Signals input from 2-channel sources can also be played
back on multiple channels.

Press AMP to select the AMP mode, then press
STANDARD on the remote control to switch
between the SUR. STANDARD and SUR.
ENHANCED programs.

Or press MOVIE to select the MOVIE THEATER
program.

Press SELECT on the remote control to select
the decoder.

You can select from the following modes depending on the
type of software you are playing and your personal
preference.

When you select the SUR. STANDARD program:

PRO LOGIC

Dolby Pro Logic processing for any sources.

PLII Movie

Dolby Pro Logic II processing for movie software.

PLII Music

Dolby Pro Logic II processing for music software.

PLII Game

Dolby Pro Logic II processing for game software.

PLIIx Movie

Dolby Pro Logic IIx processing for movie software.

PLIIx Music

Dolby Pro Logic IIx processing for music software.

PLIIx Game

Dolby Pro Logic IIx processing for game software.

Neo:6 Cinema

DTS processing for movie software.

Neo:6 Music

DTS processing for music software.

When you select the SUR. ENHANCED or MOVIE
THEATER program:

PRO LOGIC

Dolby Pro Logic processing for any sources.

PLII Movie

Dolby Pro Logic II processing for movie software.

PLIIx Movie

Dolby Pro Logic IIx processing for movie software.

Neo:6 Cinema

DTS processing for movie software.

You can also select a decoder by pressing

on the remote

control when the decoder type is displayed in the front panel
display.

The Pro Logic IIx decoder is not available when “SUR. B” is set
to NONE (see page 56).

Notes

AMP

STANDARD

MOVIE

SELECT

Note

Summary of Contents for RX-V457

























































































Search results

Summary of Contents for RX-V457

Reviews:

Related manuals for RX-V457

Brands by name

Popular brands

Yamaha RX-V457, Owner'S Manual

Search results

Summary of Contents for RX-V457

Reviews:

Related manuals for RX-V457

Brands by name

Popular brands