Yamaha RX-V420 Owner'S Manual Download Page 18

Page: 18 / 69

Connecting Video Components

■

Audio signal jacks

Be sure to connect the right channel (R), left channel (L), input (IN) and output (OUT) properly.

■

Video signal jacks

Be sure to connect the input (IN) and output (OUT) properly.

■

S VIDEO jacks

If your video component has “S” (high-resolution) video
jacks, they can be connected to this unit’s S VIDEO jacks.
Otherwise, connect the composite video jacks of your video
component to this unit’s composite video jacks.

Notes

• Use a special S VIDEO cable (commercially available) for the S

VIDEO connection.

• If video signals are input from both the S VIDEO input and

composite input jacks, the signals will be directed to their
respective output jacks.

■

VIDEO AUX jacks (on the front panel)

AUDIO OUT R

AUDIO OUT L

VIDEO OUT

OPTICAL OUT

S VIDEO OUT

VIDEO AUX

S VIDEO

VIDEO

L AUDIO R

OPTICAL

S VIDEO

VIDEO

MONITOR OUT

DVD

D-TV/CBL

IN VCR 1OUT

VIDEO SIGNAL

S VIDEO OUT

S VIDEO
OUT

S VIDEO IN

S VIDEO OUT

DVD player

Video monitor

S Video signal

Signal flow

TV/digital TV,

cable TV or

satellite tuner

VCR

Game console

or camcorder

CONNECTIONS

These jacks are used to connect any video input source such as a game console or camcorder to this unit.

RX-V520 only

AUDIO OUT R

AUDIO OUT L

VIDEO OUT

VIDEO AUX

VIDEO

L AUDIO R

RX-V520

RX-V420

Game console

or camcorder

0103V520/V420_10-20_EN

2/6/1, 2:38 PM

Summary of Contents for RX-V420






































































Search results

Summary of Contents for RX-V420

Reviews:

Related manuals for RX-V420

Brands by name

Popular brands

Yamaha RX-V420, Owner'S Manual

Search results

Summary of Contents for RX-V420

Reviews:

Related manuals for RX-V420

Brands by name

Popular brands