RX-V420/RX-V420RDS/HTR-5440/HTR-5440RDS
RX-V420/RX-V420RDS/ HTR-5440/HTR-5440RDS
9
■
SELF DIAGNOSIS FUNCTION (DIAG)
There are 14 DIAG menu items each of which has sub-menu items. Listed in the table below are menu items and sub-menu
items.
No DIAG menu
sub-menu
Remote control code (key)
1
DSP THROUGH
1. ANALOG BYPASS
7A-88 (PRG 1)
2. M, C, R, SW CH
7A-89 (PRG 2)
3. Main HPF
7A-8A (PRG 3)
4. FULL BIT
–
5. FULL BIT F
–
2
FRONT CH
1. FRONT NORMAL
7A-8B (PRG 4)
2. FRONT MIX
7A-8C (PRG 5)
3
RAM THROUGH
RAM 0dB (2ch/Multi)
7A-10 ()
4
PRO LOGIC
YSS928
7A-8D (PRG 6)
5
MARGIN CHECK
1. MAIN 3dB Margin
7A-11 (PRESET-)
2. MAIN 12dB Margin
7A-12 (P. PAGE)
3. MAIN 18dB Margin
7A-0C (CD FW)
6
MAIN MIX
1. CENTER -> MAIN
7A-00 (TAPE PLAY)
2. SW -> MAIN
7A-8E (PRG 7)
7
OTHER INPUT
EXTERNAL DECODER
7A-8F (PRG 8)
8
DISPLAY CHECK
1. VFD DISP OFF (All segments OFF)
7A-01 (TAPE RW)
2. VFD DISP ALL (All segments ON 100%)
7A-02 (TAPE FW)
3. VFD DIMMER (All segments ON 50%)
–
4. CHECKED PATTERN1 (ON in lattice)
7A-03 (TAPE STOP)
5. CHECKED PATTERN2 (ON in lattice)
–
9
MANUAL TEST
1. TEST ALL
7A-90 (PRG 9)
2. TEST MAIN L
7A-04 (TAPE PAUSE)
3. TEST CENTER
7A-05 (TAPE MUTE)
4. TEST MAIN R
7A-06 (TAPE A/B)
5. TEST REAR R
7A-07 (TAPE DIR A)
6. TEST REAR L
7A-08 (CD PLAY)
7. TEST LFE
7A-09 (CD STOP)
10 PRESET
1. PRESET INHIBIT (memory initialization inhibited) –
2. PRESET RESERVED (memory initialized)
7A-57 (SLEEP)
11 AD DATA CHECK
1. DC/PS (protection)
7A-0B (CD SKIP-)
2. IMP/PL (impedance/power limiter)
–
3. 0/1/2 (panel key)
–
12 IF STATUS
1. IST (internal status)
–
2. CS1 (channel status 1)
–
3. CS2 (channel status 2)
–
4. CS3 (channel status 3)
–
5. CS4 (channel status 4)
–
6. CS5 (channel status 5)
–
7. BI1 (BSI-DD 1)
–
8. BI2 (BSI-DD 2)
–
9. BI3 (BSI-DD 3)
–
10. BI4 (BSI-DD 4)
–
11. BS1 (BSI-DTS 1)
–
12. BS2 (BSI-DTS 2)
–
13. BS3 (BSI-DTS 3)
–
14. BS4 (BSI-DTS 4)
–
15. YS1 (YSS928-1)
–
16. YS2 (YSS928-2)
–
17. YS3 (YSS928-3)
–
13 DSP RAM CHECK
BUS CHECK
7A-0A (CD SKIP+)
14 VERSION/CHECK SUM/PORT
1. VER. (Version information)
7A-0D (CD REW)
2. 1/2 (Checksum 1/2)
–
3. PORT (Port check)
–
