40
SETTING THE SLEEP TIMER
If you use the SLEEP timer of this unit, you can have this unit automatically put in the standby mode after a set period of time.
When you want to go to sleep while enjoying a broadcast or other desired input source, this timer function is helpful.
Notes
●
The SLEEP timer can be controlled only with the remote control transmitter.
●
The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear
panel of this unit.
To set the SLEEP time
1
Whenever the SLEEP button is pressed, the SLEEP
time will change as follows.
After a while, the display returns to the indication
displayed before the SLEEP timer was set.
2
The unit will be turned into the standby mode
automatically at the selected SLEEP time.
Press repeatedly to select the desired
SLEEP time.
Indicates the SLEEP time.
Lights up.
(Minutes)
The SLEEP timer is off (OFF).
(The state before the SLEEP
button is pressed.)
To cancel the selected SLEEP time
Press repeatedly until “SLEEP OFF” appears in the display. (It
will soon disappear and the “SLEEP” indicator will go off from
the display.)
Note
The SLEEP timer setting can also be canceled by putting this
unit into the standby mode with the STANDBY/ON switch on
the front panel (or the POWER /I button on the remote
control transmitter) or disconnecting the power plug of this unit
from the AC outlet.
SLEEP
CONCERT HALL
120
90
60
30
