background image

18

DISPLAY PANEL

~

Multi-information display

Displays various information, for example station frequency,
preset station number and name of selected input source.

Ÿ

STEREO indicator

Lights up when an FM stereo broadcast with sufficient signal
strength is received.

!

Signal-level meter

Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.

SLEEP indicator

Lights up while the built-in SLEEP timer is functioning.

@

Center channel mode indicators

The name of a selected center channel mode lights up only
when a program which uses Dolby Pro Logic Surround is
selected.

¤

EFFECT OFF indicator

Lights up if neither the digital sound field processor nor the
Dolby Pro Logic Surround decoder is on. In this state, sound
output is 2-channel stereo.

#

MEMORY indicator

When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E button
and the preset station number selector buttons.

AUTO indicator

Lights up when this unit is in the automatic tuning mode.

$

TAPE MON indicator

Lights up when the tape deck (or MD recorder, etc.) is selected
as the input source by pressing the TAPE/MD MONITOR
button.

DSP program indicators

The name of a selected DSP program lights up when the built-
in digital sound field processor or the Dolby Pro Logic Surround
decoder is on.

PRESET

kHz

MHz

MEMORY AUTO

SLEEP

TAPE MON

STEREO

0 20

l00

ms dB

PRO LOGIC
ENHANCED

CONCERT

VIDEO

MONO

MOVIE TV SPORTS

DISCO

ROCK CONCERT

CONCERT HALL

NORM

WIDE

PHANTOM

EFFECT OFF

~

Ÿ

@ ¤

$

#

!

Summary of Contents for RX-V395





















































Reviews: