Yamaha RX-V359, Service Manual

Page: 30 / 74

RX-V359/HTR-5930
30
RX-V359/HTR-5930
1st byte
5th byte
4th byte
3rd byte
2nd byte
1st byte
3rd byte
2nd byte
<5th byte> Signal processing status information
*2: With digital signals other than 32kHz, 44.1kHz and
48kHz, through processing method is used for
reproducible signals.
bit7 MUTE request bit3 –
bit6 Red dts flashing bit2 Through & bypass (*2)
bit5 6.1/EX processing bit1 –
bit4 FULL MUTE (ON: 1) bit0 dts analog mute
12. IF STATUS (Input function status)
(Not applied to these models.)
Using the sub-menu, the status data is displayed one after
another in the hexadecimal notation.
During signal processing, the status before execution of
this menu is maintained.
* Numeric values in the figure example are for reference.
<1st byte> Digital input/output setting value
Upper 4 bits: REC OUT selected /
lower 4 bits: INPUT selected
Display 00 01 02 03 04 05 06 0A 0B 0C 0D
Fs (kHz) Analog 32 44.1 48 64 88.2 96 Unknown NRM Unknown DBL Unknown QUAD Not defined
Value Choice Preset name
0 NONE
1 OPTA
2 OPTB DTV/CBL
3 OPTC DVD
4 OPTD
6 OPTF
8 COAXA CD
9 COAXB
<4th byte> Format information of reproduction signal
*1: Analog processing used for digital reproduction is not
possible because of a commercial bit or 4-ch audio
reason.
<2nd byte> Fs information of reproduction signal
<3rd byte> Audio code mode information of reproduction signal
Display 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
Audio Code 1+1 1/0 2/0 3/0 2/1 3/1 2/2 3/2 2/3 3/3 OVER 6.1 MULTI MONO MULTI PCE Unknown
Display Signal format
00 Analog (Unlock)
01 *1
10 PCM Audio
20 Digital Data
21 IEC1937 Data
22 None PCM
23 Unknown
50 dts
51 Red dts
54 dts-ES MATRIX
58 dts-ES DISCRETE
5C dts-ES (Both flag)
60 AAC
C0 Dolby Digital
C1 D.D. Karaoke
C4 D.D.6.1 (D.D.EX)
IS1, 2 (Internal status):
Indicates the status information of the microprocessor.